Wednesday, February 16, 2011

Aiming a Yagi Antenna

Aiming a Yagi Antenna

The reason that so many manufactures and retail outlets sell Cellular Repeater systems with Omni antennas is because either they don't think that the consumer can handle pointing the Yagi or because they do not want to take the time to explain the process of aiming the antenna.

First we will look at why a Yagi antenna is a better choice in most situations. Then I will discuss the proper way to determine what direction to aim your antenna to optimize your repeater system.

To understand the reason for a Yagi verses an Omni we need to understand the differences between how an Omni and a Yagi deal with signal. An Omni is designed to receive signal equally from all directions. This may sound advantageous and it definitely makes installation easy. However……..

In this map you will see that the stick pin (our building) is almost equally spaced between three signal sources. With an Omni antenna placed on your roof top your cellular device would constantly have to choose which tower it wants to connect to. This will cause your signal to fluctuate and your call may be dropped because the network can not handle all the switching back and forth.

You might be thinking well if this is a problem, why wouldn't the cell phones have these problems? The simple answer is that your body acts like a shield and helps reduce the signal from some of the towers. That is why some times you can be talking and turn and drop a call.

Using a Yagi on your roof top will help eliminate this issue because a Yagi is able to isolate the signal to one tower and eliminate or greatly reduce the signal from the others.

Now back to the topic.

Aiming your Yagi requires several extra steps to help determine were to place the antenna and what direction to point it. (Mounting the antenna is covered here)

First you need to get signal readings from around the outside of your building and on the roof top. Most cellular providers have phones that can be put in to test mode, this allows you to obtain numeric signal readings that are far more accurate than bars. You can check the list here to see if your phone can be put in to test mode. If for some reason you can not put your phone in to test mode you will have to use bars on your phone to determine your signal. This is not nearly as accurate but it will work if you don't have any other way.

In this graphic you will see the locations that you need to take your readings. All readings will be portrayed as a negative number, a -103 is very bad signal and a -60 would be extremely good signal. Most phones show full bars at about a -85 or better.

By taking the readings this way, you use the building as a shield and this helps you determine the direction of the closest tower for your cellular provider. (This is the only way other than using a $10,000.00 spectrum analyzer to figure out what direction the tower is that you get the best signal from.) While taking readings from each side you should also make a phone call and than take a reading after the call again just to make sure the reading is accurate.

Many times I have been told by a customer that they know exactly were their closest tower is but when they perform this task they find out that the tower they are getting their signal from is in a different direction. This step will save a tremendous amount of time in the long run.

Once this process is completed you can start the installation. I will be covered the installation process in one of our future blog posts. For details on mounting the Yagi visit,"Installing a Yagi here ".

If you have any other questions regarding Yagi antennas or cellular repeaters please visit www.cellularsolutions.com or call 1877-233-6673 and we will be happy to assist you.

Jay Nelson

Technical support

Cellular Solutions

Tuesday, February 1, 2011

Installing a Yagi Antenna

Installing a Yagi Antenna

Yagi antennas are a directional antenna. Most people are most familiar with the old TV antennas that were mounted outside on the roof of a home. This is a Yagi style antenna. The name Yagi refers to the designer that came up with this design or style of antenna.




This is a typical Yagi TV antenna (shown for reference only it will not work for cellular reception)

A Yagi antenna has many advantages over an Omni antenna. But it will take a little more work to install.

From this point we will be discussing Yagi antennas that are specifically for the Cellular frequencies and PCS frequencies.

These are examples of different style/frequency Yagi antennas

First we need to discuss polarization of the signal. The first picture is of a TV antenna mounted to a pole in a horizontal position this means that the receiving elements of the antenna are horizontal to the ground. With a cellular Yagi antenna the polarization needs to be vertical. This means that the elements that attach to the boom of the antenna will be vertically mounted.

Some times the Yagi antenna is encased in plastic cover this is to protect the antenna from the weather and to make it more aesthetically pleasing. Below you will find examples of this style antenna mounted to a pole. I also removed the plastic covering to show why the antenna needs to be mounted in this fashion and the last picture is an example of what not to do.

This is an example of a properly mounted antenna. As you can see from the second picture the narrow end is the end that will be pointed in the direction of your best signal for your cellular provider.

This is an example of how not to install a Yagi antenna to a pole.

Now lets discuss were to mount the pole and antenna on your building. Because this style antenna receives signal from the narrow end and rejects signal from the wide end the antenna will need to be placed on the outside of the home as high as possible an the side that has the best signal. You do not want the antenna mounted for example on the back of the home but be pointed across the roof of the home.

This is an example of a properly mounted antenna.

This is an example of a Yagi antenna mounted on the wrong side of a building pointed across the roof.

Cellular Solutions

Technical Support

Jay Nelson

1-877-233-6673


Tuesday, June 29, 2010

Great iPhone 4 Review


Apple said Monday that it sold 1.7 million iPhone 4s in three days after its launch last week, calling it its most successful product launch ever.

The iPhone 4 is still sold out at many stores. Online purchasers are told orders will ship in three weeks. "We apologize to those customers who were turned away because we did not have enough supply," Apple CEO Steve Jobs said in a statement.

Last year, the 3GS iPhone sold 1 million units in its first three days.

Click Here To Read the Full Review

Thursday, June 17, 2010

Motorcyclist's body found by cellphone GPS

Nova Scotia police found the body of a missing motorcyclist Wednesday by tracking the GPS on his cellphone.

RCMP said the 48-year-old man left Hammonds Plains at about 8:30 a.m. to shop in Bridgewater. When he didn't return home, worried relatives called police.

Cpl. Joe Taplin said investigators contacted the man's cellphone service provider, and that led them to a ditch in Hubley, southwest of Halifax.

RCMP found the motorcyclist and his Yamaha at 11:30 p.m.

"The cellphone had a GPS on it and by using that we were able to locate the man near Joshua Slocum Drive," Taplin said.

GPS-equipped cellphones can allow police to track missing people and criminals.

But conventional cellphones without GPS can also be tracked, says Jesse Hirsh, CBC Radio's technology columnist.

"When cellphones connect, just making themselves available to accept calls, they are leaving a data trail of all the cellphone towers that they connect to, and that allows carriers to literally map out where a customer is," he said.

But that provider has to record and then recover the information, he added.

"From that data you're able to get a rough estimate of where people are. I mean, the accuracy is very general, it doesn't show you, for example, a specific intersection. It would show you a general area of say several hundred metres."

An RCMP traffic collision analyst is trying to determine the cause of Wednesday's crash. An autopsy is planned for Thursday.

Read more: http://www.cbc.ca/technology/story/2010/06/17/ns-fatal-motorcycle-crash.html#ixzz0r8MwAq9M

Friday, June 11, 2010

Video Conferencing On Your Cell Phone!

Speaking at a conference, Motorola CEO Sanjay Jha said that the company plans to introduce "two to four" handsets later this year with front-facing cameras, which could be used for video calling. Jha said he never felt mobile video conferencing was a compelling feature, but Motorola's phones will support it. Just a few weeks ago, Jha said that Motorola plans to introduce two new Android handsets with Verizon Wireless this summer. It is possible that one or both of these handsets will have the video feature in question. Jha also indicated that the Motorola Droid is still selling very well at Verizon Wireless. "(Droid) sales are going extremely well. If I could build more I'd sell more," Jha said. Jha noted that Motorola is a victim of supply chain constraints that are reducing the number of handsets it can produce.

Tuesday, June 8, 2010

NEW 68 dB Amp and Kit




Product Overview:
The Cellphone-Mate 68dB Dual Band Cellular Repeater Kit includes the CM2020 68dB Amplifier. This kit is suitable to cover every major network provider (with the exception of Nextel), over an area up to 10,000 square feet.

The kit includes a Dual Band Yagi Directional donor antenna, one 50' LMR400 cable length with N-Male connectors, the Cellphone-Mate CM2020-68 bi-directional cellular amplifier, one 30' LMR400 cable length with N-Male connectors, and one internal dome antenna.

The kit is designed to cover medium to large areas where both frequencies are used by a single carrier or when multiple carriers need to be amplified.


Electrical Parameters

Frequency range

Uplink: 824-849 and 1850-1910 MHz
Downlink: 869-894 and 1930-1990 MHz

Standard supported

CDMA, WCDMA, GSM, EDGE, TDMA and AMPS etc.

Gains

Reconfigurable gain, maximum 68dB

Maximum output power

3 Watts EIRP

Impedance

50 ohms

Noise figure

Maximum 5 dB

VSWR

Less than 2:1

AC power transformer

Input: AC110V, 60Hz; Output: DC 9V

Cable

LMR400 or CM400 recommended

RF connectors

N female connectors on both ends

Power consumption

<9w>

Operating temperature

-15° to +55°C

Dimension

7.25x7.375x2.00 inch /18.4x18.7x5.1 cm

Weight

4.72 lb



Buy it now!

Friday, June 4, 2010

Cell phones killing Bees!?!

Are Cell Phones Killing Off Bees?

(CANVAS STAFF REPORTS) - Could cell phones be the cause of a massive decline in bee populations across Europe and North America?

Researchers in India think that radiation from mobile telephones is a key factor and is probably interfering with the navigational senses in bees, reports The Daily Telegraph .

Authors of the report, which appears in the journal Current Science , write: " Increase in the usage of electronic gadgets has led to electro-pollution of the environment. Honeybee behavior and biology has been affected by electro-smog since these insects have magnetite in their bodies which helps them in navigation."

The authors, Ved Prakash Sharma and Neelima Kumar from Chandigarh's Punjab University, wrote that both colony strength and the egg-laying rate of the queen declined significantly.

The study involved the comparison of bees in two hives in Punjab. They fitted one fitted with two mobile telephones that were powered on for two 15-minute sessions per day for three months, and placed dummy models in the second hive, reports The Telegraph.

At the end of the period the researchers say there was a dramatic decline in the size of the hive fitted with the mobile phone. Honey production also stopped and the queen bee in the hive with the phones produced only half the eggs as the one in the other hive, researchers found.

The decline has been blamed on various causes, including agricultural pesticides, climate change and genetically modified crops, reports Australian Broadcast Company .

"Previous work in this area has indicated this (mobile phone use) is not a real factor," Tim Lovett, of the British Beekeepers Association, tells The Telegraph. "If new data comes along we will look at it. At the moment we think is more likely to be a combination of factors including disease, pesticides and habitat loss."

Read the Article Here

Thursday, May 27, 2010

Partnership Program

Cellular Solutions’ Referral Partnership (CRP) program, which will complement the Cellular Solutions Industry Partnership (CIP) program, offers additional income potential to existing communications providers while offering an additional communication solution to their arsenal. The end user can find comfort in the implementation of this new cellular technology, that a leader in the industry with many years of cellular RF experience will be teaming with their personal IT professional to provide a flawless implementation. These newly deployed programs will offer a value added resource to all companies currently offering in-building communication solutions.



Cellular Solutions Referral Partnership


The Cellular Solutions Referral Partnership (CRP) program is designed for solution companies that target, but not limited to, the Banking, Hospitality, Medical, Manufacturing, Education, Office Building and Transportation industries and wish to increase their revenue by helping their customers find a dependable provider of cellular DAS solutions — without needing the knowledge of how to sell, implement, or support the products. If Cellular Solutions completes a sale as a result of a partner referral, the partner will receive a referral fee as a thank you for introducing Cellular Solutions to the opportunity. Under the CRP program, partners work with Cellular Solutions to determine the best integration method between their product(s) and Cellular Solutions’ products.

As a partner in Cellular Solutions Referral Partnership Program, a referral fee of 10% of the product portion of the project will be paid to the partner. Cellular Solutions will provide a turnkey solution for the end user, from the initial site evaluation and engineering phase through the installation, system configuration and start up. The partner will not need to invest any time or labor to ensure the end user’s needs are taken care of. To participate in the CRP program, no contract is required. The voluntary participation of the partner will be continued on a job by job basis.



Cellular Solutions Industry Partnership


The Cellular Solutions Industry Partnership (CIP) program provides vertical market communication companies the ability to offer Cellular Solutions engineered and guaranteed systems and seamlessly integrate them with their solutions through a service oriented design
process. This provides a partner with the ability to quickly and easily expand their product offering, increase revenue, and offer their customers a single vendor solution without having to develop it themselves. As a partner in Cellular Solutions Industry Partnership Program, complementary engineering will be provided upon the receipt of pertinent structural information provided by the partner, a 10% discount will be offered on the products necessary to deploy cellular repeater infrastructure, and complementary technical support will be provided via telephone if partner chooses to self install solution. In order to extend the Cellular Solutions guarantee of full coverage throughout the requested client areas, Cellular Solutions must conduct the installation. In the event partner would prefer Cellular Solutions to conduct the installation to ensure guaranteed coverage, an additional 10% discount will be offered on the installation rate.

To participate in the CIP program, the partner must agree to work exclusively with Cellular Solutions for a period of one year, all products purchased for the use of rebroadcasting cellular signal for their clients will be purchased from Cellular Solutions during the time of the one year contract. At the conclusion of the one year contract the two parties, may choose to engage in an additional year long partnership or to split ways.



“Our partnership programs are a great way for companies to increase revenue by receiving a referral fee or to increase their product offering by adding a cellular DAS system to their portfolio quickly and without a lot of the expenses associated with developing and launching a robust suite of solutions.” – A King, CEO

Thursday, May 20, 2010

Wednesday, May 19, 2010

Spotlight on 801212 Vehicle Amplifier System

• Allows multiple phones and data cards to be used simultaneously
• Supports CDMA, TDMA, GSM and AMPS, in addition to 1x and 3x data protocols such as HSDPA, EVDO and EDGE
• Up to 3 watts maximum output power
• Power control logic ensures maximum output power is within cellular standards
• Requires no physical connection to cell phone or data card
• Provides high signal-to-noise ratio
• protects cell sites from harmful interference
• Includes our high efficiency 12” exterior magnet mount antenna
• Dual band - Cellular and PCS
• FCC and IC type accepted
Specifications
Part Number

801212
Frequency

824-894 MHz / 1850-1990 MHz
Gain

40 dB / 45 dB
Max Output Power

3 watts
Max RF

+35 dBm / +10 dBm
Noise Figure

3 dB nominal
Flatness

± 3 dB / ± 4 dB
Isolation

> 90 dB
Power Requirements

6 V, 3 A max
Connectors

FME-Male 50 ohms
Dimensions

4.5 x 3.5 x 1.25 (inches) / 11.43 x 8.9 x 3.2 (cm)
Weight

1.5 lbs / 0.7 kg

Buy It Now

Monday, May 17, 2010

Find Your Frequency

What frequency do you need for your cell phone amplifier?? Using your zip code you can find out if you would need a single band (800 or 1900 Mhz) or dual band. Enter it below!

Search for Cell Phone Service














WirelessAdvisor.com


Friday, May 14, 2010

New York Times - Cellphones Now Used More for Data Than for Calls By JENNA WORTHAM

Read the Full Article Here

Highlights

  • Almost 90 percent of households in the United States now have a cellphone.
  • The number of text messages sent per user increased by nearly 50 percent nationwide last year, according to the CTIA, the wireless industry association.
  • For the first time in the United States, the amount of data in text, e-mail messages, streaming video, music and other services on mobile devices in 2009 surpassed the amount of voice data in cellphone calls, industry executives and analysts say.
  • When people do talk on their phones, their conversations are shorter; the average length of a local call was 1.81 minutes in 2009, compared with 2.27 minutes in 2008, according to CTIA.
  • American teenagers have been ahead of the curve for a while, turning their cellphones into texting machines; more than half of them send about 1,500 text messages each month, according to a recent study by the Pew Research Center's Internet and American Life Project.
Thoughts

  1. Cell phone companies are going to have to keep expanding phones to be capable of doing everything. People want to have the option to update facebook, twitter, email all on their phone. Only a matter of time before everyone phone will have full personal computer functionality.
  2. Texting while driving has become such a dangerous habit, with the increase of texting it will only be a matter of time before voice and text are integrated, allowing users to speak and hear their text messages.
  3. The price markup on texting for the carriers is so huge, they will continue to promote and encourage texting.

Thursday, May 13, 2010

Cellular Solutions Commercial




A clever advertisement our marketing team came up with. Not their normal high comedy piece but leaves the viewer to inquiry more....

Wednesday, May 12, 2010

Did you know?

State law prohibits drivers in California and Minnesota from using suction mounts on their windshields while operating motor vehicles.

Something to keep in mind when looking for an in-vehicle cellular system as some mounts utilized window suctions!

Tuesday, May 11, 2010

Testimonial!

"I Just wanted to thank everyone for the great work Cellular Solutions did on selecting the right product for our dorm cellular situation. We got the product installed yesterday and the comments, praise, and words 'freakin amazin' are flying around like you wouldn't believe. Anyway, I think it's safe to say we'll be ordering a few more of them....."

-Greg Maples
Freed-Hardeman University
Information Technology Department

Thursday, May 6, 2010

Great NY Times article about why our services are so important

Read It Here

Dead Zone Doldrums Test Skills of iPhone Customers
By PAUL BOUTIN
Published: April 28, 2010

Owners of iPhones know that their love for Steve Jobs’s touch-screen marvel comes at a price. The iPhone’s cellular coverage, provided exclusively by AT&T Wireless, is notoriously spotty. In some parts of New York and San Francisco, it’s impossible to connect.
Tony Cenicola/The New York Times

Options for better iPhone call reception include standing near a window.
Enlarge This Image
AT&T via Associated Press

A 3G base station.

Skype’s iPhone app.

If you go for a dim sum lunch at Yank Sing restaurant on the edge of the financial district in San Francisco, you are likely to miss calls from the office. Some owners can’t use their iPhones in their own homes. Even AT&T Park, the city’s waterfront stadium, can be a dead zone.

The iPhone service is affected by several factors. First, AT&T’s 3G network doesn’t cover as much ground as Verizon, America’s largest carrier. Second, urban areas packed with tall buildings are bad for wireless signals. Skyscrapers can block radio waves, or they can bounce them around to create what’s called multipath interference, where signals from different directions collide and cancel each other out.

But the iPhone’s worst enemy is the iPhone itself. So many Americans use them in the same places and at the same time that they are competing with one another for use of the network. “A hundred cellphones demanding bandwidth per cell site may not be out of the question in congested downtown areas,” said Tim Pozar, a wireless engineer who installs custom repeater systems to improve cellphone coverage at offices in the San Francisco area. IPhone owners have proved to be heavy consumers of network capacity.

What to do? There is no single magic bullet to improve iPhone service. You can spend hours trying to persuade AT&T to let you out of your contract. The time you spend doing that will cost more than the contract termination fee.

Knowing a few tricks might get you a connection. If your touch screen says “No Service,” the easiest fix is to hold the phone completely vertical, rather than slanted across your cheek. The iPhone’s antenna is meant to reach furthest if it is held straight up and down. If that doesn’t work, move. Indoors, walk to a window. Outdoors, cross the street.

For the newer 3G-capable iPhones, turning off the 3G in favor of AT&T’s older Edge network is sometimes effective. Go to the iPhone’s Settings icon. Tap General, then Network. Slide the Enable 3G toggle from On to Off. But you can’t talk and browse the Web at the same time on Edge.

Another alternative is to use a Wi-Fi hot spot to make calls. Skype, the popular Internet phone service, will make and take calls as long as you leave the app running and signed in. (Until an iPhone can multitask, that means you have to have the Skype app on all the time.) Calls with other Skype users are free, but calls to and from phones cost about two cents a minute. The app is available in the iPhone App Store.

Skype call quality varied in our tests from clear to sputtery, with a delay from one half-second to three or four seconds. Also, the app works only over Wi-Fi, so you will need to juggle between Skype and AT&T, depending on where you are.

Or, for $15 a month, you can subscribe to the Line2 app that mimics Apple’s phone in look and feel, but switches calls to a Wi-Fi network whenever the iPhone connects to one.

Line2 can start a call on AT&T’s 3G network and then transfer to Wi-Fi, whereas Apple won’t allow Skype to handle calls via AT&T. If left running, it will also receive inbound calls over Wi-Fi. (If Apple were to add a Wi-Fi option to the built-in Phone app, this wouldn’t be a problem.)

But for reliable service, there is no substitute for hardware that increases range. That is why AT&T has begun offering home 3G base stations that look like Wi-Fi routers, but send and receive 3G radio signals instead. These microcells, as AT&T calls them, connect to the Internet and offer wireless coverage of up to 40 feet in any direction. They work with any 3G AT&T phone, but not with Apple’s older non-3G model of iPhone.

The catch is that you will have to pay AT&T for the boost. There are two payment plans: If you buy the microcell for $150, AT&T will charge your voice calls made using the device against the minutes on your monthly wireless plan. Or you can sign up for unlimited calling for a $20 a month fee, and get the microcell free.

Many people consider it outrageous that AT&T isn’t handing out microcells to solve what they see as a problem that AT&T created. But you do get your own personal cellphone tower without needing the approval of your neighborhood’s opposition watchdog group.

AT&T’s microcell is built by Cisco, a company with a reputation for solid network gear. Setup isn’t exactly plug-and-play, but it doesn’t require you to be a technician. You log in to attwireless.com — you’ll need to create an account if you haven’t already — and open a URL clearly labeled on a sticker that covers the microcell’s cable ports. Enter the microcell’s serial number and the 10-digit phone numbers of the iPhones you want it to serve. Then, as the instructions warn, you must wait up to 90 minutes while the microcell configures itself.

Call quality over the microcell was almost shockingly clear, ungarbled and free of the underwater sound that plagues many cellphone calls. You also might be less likely to experience the common many-second delays between your saying something and the other party’s hearing it. Cellular experts warn that delays and stuttering calls are still possible because these are caused by Internet traffic jams rather than the microcell.

If you make a call from inside the house and then walk outside, you can expect the microcell to reliably hand off the call to a local tower. Calls made outside, though, don’t transfer to the microcell when you get home. The only annoyance you may find with the AT&T unit is that whenever it is rebooted, as home networks sometimes are, it may take about 20 minutes to come back online.

AT&T’s solution will work for homes and small offices. But the company is clear that you can’t take it with you. It may not connect if plugged in somewhere else. So how to solve the restaurant dead-zone problem?

Mr. Pozar says the best fix is for the location to install its own repeater. For $1,000 to $5,000 in parts and labor, a hot dim sum spot could route calls through an outside antenna that connects to an inside amplifier.

That’s not cheap. But instead of a Free Wi-Fi sign, what better way to attract big spenders than one that says iPhone Hot Spot?

Cellular Solutions Rap



In one of the more embarrassing videos of all time, Paul and Robert take Cellular Solutions to a new level. Their funky flows and sweet melody will surely make them overnight sensations...

Tuesday, May 4, 2010

Cellphone-Mate 62 dB Dual Band System



Cellular Solutions is proud to announce they are now selling Cellphone-Mate 62 dB amplifiers. The 62 dB will also be available in a kit. The 62 dB system is a perfect fit for someone in between a 55 dB and a 65 dB system. Having a 62 dB system will allow users to get more coverage than a 55 dB while not paying the 65 dB price.

The system works with all carriers with the exception being Nextel. Cellphone-Mate advertises up to 4,000 square feet of coverage with the 62 dB system. While 4,000 square feet is the maximum coverage, true coverage is based upon outside signal, internal walls, etc. We are in the process of field testing now. Check back for a full review on the product.

Give us a call and ask one of our technicians which system will be right for you.

To view more information on the system, click here.